Air Inlet Manifold (In Chassis) - Remove

Air Inlet Manifold (In Chassis) - Remove

Removal Procedure

Start By:

1. Remove the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Remove and Install".
2. Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
3. Remove the air inlet heater. Refer to Disassembly and Assembly, "Air Inlet Heater - Remove and Install"

NOTICE :Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.

1. Remove bolts (1) from the bracket for the crankcase breather.

2. Remove bolt (2), the washer, and spacer (3) from the dipstick tube.

3. Remove bolts (4) and the washers.

4. Remove air inlet manifold (5) .

5. Remove gaskets (6) from the mating surfaces of the cylinder head and the air inlet manifold.